Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 VOLT CORDLESS
IMPACT
DRIVER
REV 12a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 68853
Advertisement
Table of Contents
Related Manuals for Chicago Electric ITEM 68853
Summary of Contents for Chicago Electric ITEM 68853
- Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 68853 18 VOLT CORDLESS IMPACT DRIVER Visit our website at: http://www.harborfreight.com...
-
Page 2: Table Of Contents
Electrical safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. Item 68853... -
Page 3: Personal Safety
Power tools are dangerous in the hands of untrained users. Item 68853 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Impact Driver Safety Warnings
Keep a fire surface and pull the tool out of your control. extinguisher and a smoke detector in the area. Frequently monitor the Charger and Battery Pack while charging. Page 4 For technical questions, please call 1-800-444-3353. Item 68853... -
Page 5: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 68853 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Extension Cords
WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Page 6 For technical questions, please call 1-800-444-3353. Item 68853... -
Page 7: Specifications
Red LED: Flashing indicates that the battery is charging. Continuously lit (not flashing) indicates that the battery has finished charging and should be removed from the charger. Charger Green Item 68853 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Operation
The green power LED will light, showing that power is supplied to the Charger. 10. Press the Battery Button to release Battery Pack from the Charger. Page 8 For technical questions, please call 1-800-444-3353. Item 68853... -
Page 9: Work Piece And Work Area Set Up
Driver runs by pressing the Trigger lightly. Then 5. Remove the Battery Pack. press the Trigger harder to activate the Impact Driver. 6. Clean then store the Impact Driver indoors and out of children’s reach. Item 68853 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Maintenance
NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect Battery Pack and Charger power supply before service. Page 10 For technical questions, please call 1-800-444-3353. Item 68853... -
Page 11: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 68853 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.