Table of Contents
Advertisement
8.
Connect AC power and external devices to the computer.
9.
Turn on the computer.
To install the hard drive for the ProBook:
1.
Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the
hard drive bay (2).
2.
Pull the plastic tab (3) towards the center of the computer to engage the hard drive with the
connector.
3.
Tighten the hard drive screws (4).
4.
Replace the bottom cover (see
5.
Insert the battery (see
6.
Connect AC power and external devices to the computer.
7.
Turn on the computer.
Adding or replacing memory modules
The computer has one memory module compartment. The capacity of the computer can be upgraded
by adding a memory module to the vacant expansion memory module slot or by upgrading the
existing memory module in the primary memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
Inserting or removing the battery on page
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
Replacing the bottom cover on page
40).
38).
Adding or replacing memory modules
45
Advertisement
Table of Contents
