Table of Contents
Advertisement
9.
Use the plastic tab to lift the connector side of the hard drive up at an angle (3) and remove the
drive (4) from the computer.
To remove the hard drive for the ProBook:
1.
Save your work and shut down the computer.
2.
Disconnect AC power and external devices connected to the computer.
3.
Remove the battery (see
4.
Remove the bottom cover (see
5.
Loosen the 3 hard drive screws (1).
6.
Pull the plastic tab on the hard drive (2) towards the side of the computer to disengage the hard
drive from the connector.
7.
Use the plastic tab to lift the connector side of the hard drive up at an angle (3) and remove the
drive (4) from the computer.
Inserting or removing the battery on page
Removing the bottom cover on page
38).
40).
Replacing or upgrading the hard drive
43
Advertisement
Table of Contents
