Page 2
Bluetooth is a trademark owned by its common to most models. Some features otherwise using any software product proprietor and used by Hewlett-Packard may not be available on your computer. preinstalled on this computer, you agree to Company under license. Microsoft and...
Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Table of contents 1 Welcome ................................1 Finding information ..........................2 2 Getting to know your computer ........................4 Top ............................... 4 TouchPad ..........................4 Lights ........................... 6 Buttons and fingerprint reader (select models only) ............7 Keys ............................. 8 Front ..............................
Page 6
Using pointing devices ........................22 Setting pointing device preferences ................... 22 Using the pointing stick ...................... 22 Using the TouchPad ......................22 Turning the TouchPad off and on ..............22 Navigating ......................23 Selecting ......................23 Using TouchPad gestures ................. 23 Scrolling ....................
Page 7
7 Support ................................41 Contacting support ..........................41 Labels ..............................42 8 Specifications ..............................43 Input power ............................43 Operating environment ........................44 Index ................................... 45...
Welcome After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, see Networking on page ●...
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about ● Setup Instructions poster How to set up the computer ● Help to identify computer components ● HP Notebook Reference Guide Power management features ●...
Page 11
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA ● Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy ● Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 9115077 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address.
Getting to know your computer TouchPad NOTE: Your computer may look slightly different from the illustration in this section. Component Description Pointing stick Moves the pointer and selects or activates items on the screen. Left pointing stick button Functions like the left button on an external mouse. TouchPad on/off button Turns the TouchPad on and off.
Page 13
Component Description Right pointing stick button Functions like the right button on an external mouse. Right TouchPad button Functions like the right button on an external mouse.
Lights Component Description ● Wireless light Off: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on (select models only). ● Amber: All wireless devices are off (select models only). Num lock light On: Num lock is on.
Buttons and fingerprint reader (select models only) Component Description TouchPad on/off button Turns the TouchPad on and off. Fingerprint reader (select models only) Allows a fingerprint logon to Windows, instead of a password logon.
Keys Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key, the num lk key, the key, or other keys. For more information, see Keyboard and pointing devices on page Windows logo key Displays the Windows Start menu.
Front Component Description ● Wireless light White: An integrated wireless device, such as a wireless local area network (WLAN) device and/ or a Bluetooth® device, is on (select models only). ● Amber: All wireless devices are off (select models only). ●...
Right Component Description Media Card Reader Supports the following digital card formats: ● MultiMediaCard (MMC) ● MMC+ ● Secure Digital (SD) Memory Card ● SDHC ● SDXC ● Power switch When the computer is off, slide the switch to turn on the computer.
Page 19
Component Description USB 3.0 charging port Connects an optional USB 3.0 device and provides enhanced USB power performance. The USB 3.0 charging port can also charge select models of cell phones and MP3 players, even when the computer is off. NOTE: A charging USB port (also referred to as a powered USB port) allows you to charge connected USB...
Left Component Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Power connector Connects an AC adapter. USB 3.0 port Connects optional USB 3.0 devices and provides enhanced USB power performance.
Display Component Description WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN) (select models only). WWAN antennas (2)* Send and receive wireless signals to communicate with wireless wide area networks (WWAN) (select models only). Internal microphones (2) Record sound.
Bottom Component Description Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Service door Provides access to the hard drive bay, the wireless LAN (WLAN) module slot, the WWAN module slot, and...
Networking NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. For more information, Connecting to an existing WLAN on page 16 Setting up a new WLAN network on page...
To access the Windows Connect to the Internet Wizard and instructions for using it, select Start > Control Panel > Network and Internet > Network and Sharing Center. NOTE: If you are prompted within the wizard to choose between enabling or disabling Windows Firewall, choose to enable the firewall.
The illustration shows an example of a completed WLAN network installation that is connected to the Internet. As your network grows, additional wireless and wired computers can be connected to the network to access the Internet. Configuring a wireless router For help in setting up a WLAN, see the information provided by your router manufacturer or your ISP.
Keyboard and pointing devices Using the keyboard Identifying the hot keys A hot key is a combination of the key (2) and either the key (1),or one of the function keys (4). To use a hot key: ▲ Briefly press the key, and then briefly press the second key of the hot key combination.
Hot key Description combination fn+f3 Initiates Sleep, which saves your information in system memory. The display and other system components turn off and power is conserved. To exit Sleep, briefly slide the power switch. CAUTION: To reduce the risk of information loss, save your work before initiating Sleep. NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates Hibernation and the information stored in system memory is saved to the hard drive.
Using the embedded numeric keypad Component Description Turns the embedded numeric keypad on and off when pressed in combination with the num lk key. NOTE: The embedded numeric keypad will not function while an external keyboard or numeric keypad is connected to the computer.
Turning the embedded numeric keypad on and off Press fn+num lk to turn on the embedded numeric keypad. Press fn+num lk again to turn off the keypad. NOTE: The embedded numeric keypad is turned off while an external keyboard or numeric keypad is connected to the computer.
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options.
Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time.
Click the Device Settings tab, select the device in the window that is displayed, and then click Settings. Select the check box next to the gesture that you want to turn on or off. Click Apply, and then click OK. Scrolling Scrolling is useful for moving up, down, or sideways on a page or image.
Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock.
Maintenance Inserting or removing the battery NOTE: For additional information on using the battery, see the HP Notebook Reference Guide. To insert the battery: Insert the battery into the battery bay (1). Slide the battery release latch (2), and then slide the battery lock latch (3) to lock the battery into place.
Page 35
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.
Removing or replacing the service door CAUTION: To prevent information loss or an unresponsive system: Save your work and shut down the computer before adding or replacing a memory module or hard drive. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch.
Page 37
To replace the service door: Tilt the service door down (1) to align the front edge of the service door near the front edge of the computer. Insert the alignment tabs on the front edge of the service door into the notches on the computer. Slide the service door toward the battery bay (2) until the service door snaps into place.
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch.
Replace the 4 screws (2) to secure the hard drive. Replace the service door (see Removing or replacing the service door on page 28). Replace the battery (see Inserting or removing the battery on page 26). Turn the computer right-side up, and then reconnect AC power and external devices to the computer.
Page 40
CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before adding or replacing memory modules. Do not remove a memory module while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch.
Page 41
Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. Align the notched edge (1) of the memory module with the tab in the memory module slot. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated.
Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis with the latest versions. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Cleaning your computer Cleaning products Use the following products to safely clean and disinfect your computer: ●...
Cleaning the sides and cover To clean and disinfect the sides and cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable germicidal disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris.
Backup and recovery To protect your information, use Windows Backup and Restore to back up individual files and folders, back up your entire hard drive (select models only), create system repair discs (select models only) with the installed optical drive (select models only) or an optional external optical drive, or create system restore points.
Creating recovery media with HP Recovery Disc Creator HP Recovery Disc Creator is a software program that offers an alternative way to create recovery media. After you successfully set up the computer, you can create recovery media using HP Recovery Disc Creator. This recovery media performs a system recovery if the hard drive becomes corrupted.
NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them for backup reduces the number of recovery discs required. ● When backing up to discs, number each disc before inserting it into the external drive. To create a backup using Backup and Restore: NOTE: Be sure that the computer is connected to AC power before you start the backup process.
CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. When reformatting is complete, the recovery process restores the operating system, as well as the drivers, software, and utilities from the backup used for recovery.
Using a Windows 7 operating system DVD (purchased separately) To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to http:// www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/ wwcontact_us.html. You can also order the DVD by calling support. For contact information, see the Worldwide Telephone Numbers booklet included with the computer.
Support Contacting support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/ wwcontact_us.html.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Service label—Provides important information, including the following: Component Product name Serial number Part number/Product number Warranty period Model description (select models only) Have this information available when you contact support.
Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz.
Operating environment Factor Metric U.S. Temperature Operating 5°C to 35°C 41°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Relative humidity (noncondensing) Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Maximum altitude (unpressurized) Operating -15 m to 3,048 m -50 ft to 10,000 ft...