Connecting To The Tv - Samsung HG46NB890XF Installation Manual

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth. However, the Smart
Touch Control is only available for the paired Samsung TV.
1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the
The remote control receiver's location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to
the Smart Touch Control automatically.
Inserting the Batteries (AAA X 2)
1. Slightly lift the battery cover by pulling the strap or by inserting a plastic card (e.g. a credit card) into the notch on
the side of the remote and twisting the card slightly. Next, grasp the loosened cover in one hand and the top of the
remote in the other and gently pull them apart.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control, and then press down along the edges until it is
completely attached to the remote control.
12
English
<Attempting to connect and completion icons>
button.
P