HP Nc2400 - Compaq Business Notebook Maintenance And Service Manual page 141

Notebook pc
Hide thumbs Also See for Nc2400 - Compaq Business Notebook:
Table of Contents

Advertisement

3. Release the ZIF connector 1 to which the fingerprint reader
board cable is connected and disconnect the fingerprint
reader board cable 2.
4. Remove the two Phillips PM2.0×2.0 screws 3 that secure the
fingerprint reader board cable to the top cover.
5. Remove the fingerprint reader board 4.
Removing the Fingerprint Reader Board
Reverse the above procedure to install the fingerprint
reader board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–49

Advertisement

Table of Contents
loading

Table of Contents