HP Mini CQ10-900 User Manual page 37

▲ To connect a VGA display device, connect the device cable to the external monitor port.
Press f4 to switch the image between the display devices connected to the computer.
If the computer screen image is not switched to your external monitor after you press f4, follow these
steps:
1. Click the Gnome Display Applet icon in the notification area at the far right of the taskbar.
2. Click Detect Monitors.
3. Click the On radio button to the right of the display layout. If the default monitor is still dark, set
the resolution and the refresh rate using your external monitor specifications. Change the
rotation if desired. If you want the display image to duplicate the default monitor display, click the
Mirror Screens check box.
NOTE: Click Default to change the screen image on the external monitor to landscape mode.
4. Click Apply.
5. Click Close.
Using video devices 27