Modem - HP G62-400 - Notebook PC Maintenance And Service Manual

Removal and replacement procedures

Modem

Description
All countries and regions except for Australia and New Zealand (for models 1.0 and 1.1 only)
Australia and New Zealand (for models 1.0 and 1.1 only)
Before removing the modem:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the battery (see
6. Remove the battery (see
7. Remove the hard drive (see
8. Remove the memory module (see
9. Remove the wireless module (see
10. Remove the optical drive (see
11. Remove the keyboard (see
12. Remove the top cover (see
13. Remove the display assembly (see
Remove the modem:
1. Remove the two Phillips PM2.0×3.0 screws 1 that secure the modem to the system board.
2. Lift up the modem from the computer 2.
Reverse this procedure to install the modem.
4–36
"Battery" on page 4-7)
"Battery" on page 4-7).
"Battery" on page 4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page 4-17).
"Top cover" on page
"Display assembly" on page
4-8).
4-10).
4-12).
4-14).
4-20).
4-26).
Spare part number
510100-001
510100-011
Maintenance and Service Guide