HP FM850UT - SMART BUY 4710S T6570 Notebook Maintenance And Service Manual page 90

4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Memory module (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. Hard drive (see
g. WLAN module (see
h. Display assembly (see
i. Top cover (see
j. Heat sink and fan (see
Remove the processor:
1. Position the base enclosure, with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE:
with the triangle (4) embossed on the processor socket.
Reverse this procedure to install the processor.
80 Chapter 4 Removal and replacement procedures
Battery on page
Memory module on page
Optical drive on page
Speakers on page
Palm rest on page
Hard drive on page
WLAN module on page
Display assembly on page
Top cover on page
Heat sink and fan on page
When you install the processor, the gold triangle (3) on the processor must be aligned
42).
Switch cover and keyboard on page
46)
48)
50)
51)
53)
56)
60)
66)
75)
43)