HP FM850UT - SMART BUY 4710S T6570 Notebook Maintenance And Service Manual page 88

h. Display assembly (see
i. Top Cover (see
j. Heat sink and fan (see
Remove the RJ-45 (network) jack:
1. Disconnect the RJ-45 (network) cable from the system board (1) and remove the tape (2) that
secures the cable to the base enclosure.
2. Lift the RJ-45 (network) jack (3) straight up from the retention clips to remove it.
Reverse this procedure to install the RJ-45 (network) jack.
78 Chapter 4 Removal and replacement procedures
Display assembly on page
Top cover on page 66)
Heat sink and fan on page
60)
75)