HP FM850UT - SMART BUY 4710S T6570 Notebook Maintenance And Service Manual page 71

5. Remove the wireless antenna cables (4) from the clips and routing channels built into the top
cover.
Remove the display assembly:
1. Remove the six Phillips PM2.5×4.5 screws (1) that secure the display assembly to the computer,
and then lift the display assembly straight up (2) and remove it.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
Component replacement procedures 61