HP ENVY dv7-7200 Maintenance And Service Manual page 95

c. Keyboard (see
d. Top cover (see
e.
System board (see
f. Fan/heat sink assembly (see
Remove the processor:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2), until you hear a click.
3. Lift the processor (3) straight up, and remove it.
NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Keyboard on page 59)
Top cover on page 63)
System board on page
Fan/heat sink assembly on page
77)
81)
Component replacement procedures
87