HP ENVY dv7-7200 Maintenance And Service Manual page 86

Description
For use only on computer models equipped with an Intel quad core processor, the NVIDIAR
GeForceR 630M graphics subsystem with 1-GB of discrete memory, and the Windows 8 Standard
operating system
For use only on computer models equipped with an Intel dual core processor, the NVIDIAR
GeForceR 630M graphics subsystem with 1-GB of discrete memory, and the Windows 8
Professional operating system
For use only on computer models equipped with an Intel dual core processor, the NVIDIAR
GeForceR 630M graphics subsystem with 1-GB of discrete memory, and the Windows 8 Standard
operating system
For use only on computer models equipped with an Intel quad core processor, a graphics
subsystem with UMA memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an Intel quad core processor, a graphics
subsystem with UMA memory, and the Windows 8 Standard operating system
For use only on computer models equipped with an Intel dual core processor, a graphics
subsystem with UMA memory, and the Windows 8 Professional operating system
For use only on computer models equipped with an Intel dual core processor, a graphics
subsystem with UMA memory, and the Windows 8 Standard operating system
Thermal Pad Kit for use only on computer models equipped with an Intel processor (not
illustrated, includes replacement thermal pads)
NOTE: Computer models equipped with an AMD processor use only thermal paste and do not
require replacement thermal pads.
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c.
Keyboard (see
d. Top cover (see
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
●
WLAN module (see
●
Solid-state drive (see
78 Chapter 4 Removal and replacement procedures
Battery on page 47), and then remove the following components:
Optical drive on page
Optical drive on page
Keyboard on page 59)
Top cover on page 63)
Memory module on page
WLAN module on page 57
Solid-state drive on page
53)
53)
55)
72)
Spare part number
681999-501
682000-601
682000-501
682042-601
682042-501
682043-601
682043-501
682100-001