Top Cover - HP ENVY dv7-7200 Maintenance And Service Manual

Top cover

Description
In midnight black finish
In natural silver finisih
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
NOTE: When replacing the top cover, be sure to remove the following components from the defective
top cover and install them on the replacement top cover:
●
Front speakers (see
●
Power button board and cable (see
●
Fingerprint reader board (see
●
TouchPad button board (see
Battery on page 47), and then remove the following components:
Hard drive on page 48)
Optical drive on page
Keyboard on page 59)
Front speakers on page
Power button board on page
Fingerprint reader board on page
TouchPad button board on page
53)
67)
68)
69)
70)
Component replacement procedures
Spare part number
708009-001
708012-001
63