HP ENVY dv7-7200 Maintenance And Service Manual page 57

3. Remove the service cover (3). The service cover is available using spare part number
682088-001.
4. Disconnect the primary hard drive connector cable (1) from the system board.
5. Remove the two Phillips PM2.5×5.5 screws (2) that secure the primary hard drive to the computer.
6. Use the tab to slide the primary hard drive (3) to the left, and then remove the primary hard drive.
NOTE: The following image shows the removal of the primary hard drive.
7. Disconnect the secondary hard drive connector cable (1) from the system board.
Component replacement procedures
49