Hard Drive - HP ENVY dv7-7200 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive connector cable, hard drive
bracket, or screws. These components are included in the Hard Drive Hardware Kit, spare part number
681976-001.
Description
For use on all computer models:
1-TB, 5400-rpm, 9.5-mm
750-GB, 7200-rpm, 9.5-mm
750-GB, 5400-rpm, 9.5-mm
640-GB, 5400-rpm, 9.5-mm
500-GB, 7200-rpm, 9.5-mm
500-GB, 5400-rpm, 9.5-mm
320-GB, 7200-rpm, 9.5-mm
320-GB, 5400-rpm, 9.5-mm
750-GB, 7200-rpm, 9.5-mm For use only on computer models equipped with an Intel processor:
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Slide the battery release latch (1) to release the service cover.
2. Slide the service cover (2) toward the front of the computer.
48 Chapter 4 Removal and replacement procedures
Battery on page 47).
Spare part number
676521-001
633252-001
634250-001
669300-001
634925-001
669299-001
641672-001
622643-001
684506-001