Ricoh G700SE Software User's Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Digital Camera
  5. G700SE
  6. Software user's manual
Ricoh G700SE Software User's Manual

Ricoh G700SE Software User's Manual

Ricoh digital cameras software user guide
Hide thumbs Also See for G700SE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Software User Guide
• Read all safety precautions thoroughly to ensure safe use.
• Types of software installed on your computer varies depending on the method of installation from the
Software CD-ROM. For details, see the "Camera User Guide"
• For information on the operating systems that support the Software CD-ROM, see the "Camera User
Guide".

Advertisement

Table of Contents
loading

Related Manuals for Ricoh G700SE

Summary of Contents for Ricoh G700SE

  • Page 1 Software User Guide • Read all safety precautions thoroughly to ensure safe use. • Types of software installed on your computer varies depending on the method of installation from the Software CD-ROM. For details, see the “Camera User Guide” • For information on the operating systems that support the Software CD-ROM, see the “Camera User Guide”.

  • Page 2: Using These Manuals

    Using These Manuals How to Use the Software User Guide The two manuals included are for your G700SE. Display examples: 1. Understanding How to Use Your Camera The display examples may be different from actual display screens. “Camera User Guide” (Printed manual) Terms: This guide explains the usage and functions of the camera. You will also see how to install the In this guide, still images and movies are provided software on your computer. referred to as “images” or “files”. Symbols: This guide uses the following symbols and conventions: This indicates important notices and restrictions for using this camera. 2. Downloading Images to Your Computer “Software User Guide”...

  • Page 3: Table Of Contents

    Contents Transferring a Memo List File to the Camera ..26 The List Editor ..............26 Card Readers ..............26 Using These Manuals ...........2 Deleting Memo List Files From Memory Cards ..26 How to Use the Software User Guide ......2 Section 3 Taking Photographs with Memos Contents ................3 Recording Memos with Photographs ....

  • Page 4: Chapter 1 Downloading Images To Your Computer (Windows)

    Chapter 1 Downloading Images to Your Computer (Windows) This section explains how to download still images and movies to your computer (Windows).

  • Page 5: Downloading Images

    (GP.7). load a battery with adequate remaining power in the camera. To use DL-10, DC Software must be installed. • If there is an SD memory card in the camera, For information on how to install images will be loaded from the card. If there is DC Software, see the “Camera User Guide”. no SD memory card in the camera, images will be loaded from the internal memory on the camera. • The software included in the CD-ROM can only • Do not turn off the camera or disconnect the be used with Windows. USB cable during image transfer. The files will not be written correctly. • Do not use the computer to format the SD memory card or the internal memory. Use the camera to format the SD memory card or the internal memory. • Be sure to stop the connection before removing the USB cable. • The camera can not display pictures that have been transferred to the computer using “Windows Photo Gallery” (Windows Vista) or “Windows Live Photo Gallery” (Windows 7) and then copied from the computer to a memory card which is subsequently inserted in the camera. • Only one Ricoh digital camera can be connected to one computer. Do not connect multiple Ricoh cameras to one computer at the same time.

  • Page 6: Downloading Images Without Using Dl-10

    Downloading Images Without From the displayed drive, copy a file to the desired location. Using DL‑10 The figure below shows the folder configuration of the drive. Make sure that the camera power is off. Connect the accessory USB cable to a USB port of your computer. When the contents of the internal memory are displayed, the drive name is [RICOHDCI]. Connect the USB cable to the USB • If a file with the same name already exists at the destination, it is overwritten.

  • Page 7: Downloading All Images Using The Dl-10 Software

    Downloading All Images If image transfer does not begin, please try the following procedures: Using the DL‑10 Software • Click the [Save] button in the DL-10 window. DL-10 automatically creates a folder called • Restart your computer and perform [Digital Camera] inside your [My Documents] Steps 1 to 3 again. folder. Downloaded images are saved in • Confirm that the [Saves automatically folders with the date of each shot, inside the when connected to USB] checkbox in the [Digital Camera] folder. (The files will continue [Option settings] dialog box for DL-10 is to be saved in the [Caplio] folder if you were selected. previously using Caplio Software.) Set the correct date and time on the camera before shooting. • When the [The same image will not be saved] Make sure that the camera power is check box is selected in DL-10 [Option settings] (GP.11), the total number of files that can off.

  • Page 8: Warning Messages Under Windows Xp Service Pack 3 And Windows Vista Service Pack 2

    A screenshot of the warning message in Windows XP is shown below. Open the [Start] menu and select [Control Panel], then double-click [Windows When warning messages appear: Firewall] (if Windows Firewall is not After checking the program name and publisher, listed,click [Switch to Classic View] at click [Unblock]. the top left corner of the Control Panel window). Allow the Ricoh application Internet access. If you do not recognize the program, you should block it because it may be a virus. Click the [Keep Blocking] button to prevent the program from connecting to the Internet. If you clicked the [Ask Me Later] button: Each time the program is activated, the In the [Windows Firewall] dialog,click the [Windows Security Alert] window appears. Then [Exceptions] tab and check whether DL-10 you can select [Unblock]. is listed under [Programs and Services]. If it is, place a check in the check box next to DL-10 and click OK. If it is not listed,click...

  • Page 9: Windows 7 Security Warning

    Windows 7 Security Warning Detailed Instructions for DL‑10 On computers running Windows 7, you may Starting/Exiting DL‑10 encounter the following warning when starting Ricoh software for digital cameras either Starting manually or by connecting a camera: DL-10 is already installed with DC Software. When warning messages appear: Connecting the camera to your computer After checking the program name and publisher, automatically starts the software and begins click [Allow access]. downloading of images from the camera. Exiting To exit DL-10, follow either of the steps below. • Click the [MENU] button on the DL-10 window and select [Exit] from the displayed menu (see “The DL-10 Window”). • Right-click the DL-10 icon on the task bar and select [Exit] from the displayed menu. Restarting Disconnecting the Camera To restart DL-10 after exiting, follow the steps below.

  • Page 10: The Dl-10 Window

    The DL‑10 Window  [Application] Button The application registered in [Option Once DL-10 starts up, the following DL-10 settings] is started. window appears on your computer screen. 4 [Minimize] Button Minimizes the window and displays its icon on the Windows task bar. If you click on the icon, the window will be displayed again.  Indicator The “Indicator” lights if the camera is 1 [MENU] Button connected via USB cable. When lit, if you Click this and the following menu appears. move the mouse pointer over the “Indicator”, [Camera is being connected] appears. When your camera is not connected, the “Indicator” is grayed out, and if you move the mouse pointer over it, [Camera is being connected] does not appear. [Option settings] Specifies where to save images when downloading all images and which application to start after images have been saved or when the [Application] button is clicked. (GP.11) [Background Changes the background illustration design in the DL-10 window.

  • Page 11: How To Use The [Option Settings]

    How to Use the [Option settings] If you click the [MENU] button on the DL-10 window and select [Option settings] from the displayed menu, the [Option settings] dialog box appears. Note that uninstalling the software for earlier Ricoh cameras may reset user preferences for DL-10 or RICOH Gate La. Item Description Initial Setting [Saves Select the check box to have images downloaded and saved automatically Save automatically in your computer when the camera is connected to your computer with the automatically when connected USB cable. to USB] If you deselect the check box, your images will not be downloaded automatically when you connect your camera to the computer. For downloading, activate DL-10 and click the [Save] button. [Destination folder] Specifies which folder to save your images in. The [Digital Camera] folder inside [My Documents] is specified initially; if you want to change this, click ——— the [Browse...] button to display the dialog box and then specify the folder. [Create folder] Specifies how to create a folder. Create a new [Not created] folder for Your downloaded images will all be saved in the folder specified in item each date “2 [Destination folder]”. photographed...

  • Page 12: How To Use The [Background Illustration Settings]

    How to Use the [Background Using [CameraMemo Settings] illustration settings] Transfer images to destinations selected based on the presence or absence of memos You can select a background for the DL-10 and memo contents. Click the [MENU] button window from three types of patterns. and select [CameraMemo] to display the If you click the [MENU] button on the DL-10 [CameraMemo Settings] dialog. window and select [Background illustration settings] from the displayed menu, the [Background illustration settings] dialog box appears. 1 [Transfer From] Choose the source from [Memory Card 1 [Background illustration pattern] (specify drive or folder)] and [Digital Camera] Select the pattern you wish to use from the in the [Type] menu. If you select [Memory three available. card (specify drive or folder)], click the [Browse...] button and navigate to the desired source folder.  [Save To] Click [Browse...] and choose the destination for the transferred files. The destination type is fixed and can not be changed.

  • Page 13: Downloading Images From An Sd Memory Card

    Downloading Images from an [Overwrite and Choose whether to include save] (available images that have already SD Memory Card only when [Digital been transferred to the Camera] is selected destination. Select [Do It is possible to download images from an SD for [Transfer From] not save the same image] memory card to computer via a PC card slot or to skip images that have card reader. already been transferred. [Export type] Choose whether to Images in an SD Memory Card (available only transfer all images or only Images are stored on an SD memory card in a when [Memory those with memos. Card] is selected hierarchy, as shown here. for [Transfer From]) [Transfer mode] Choose whether the sub- folders in the destination folder are named by memo description or using...

  • Page 14: Chapter 2 Downloading Images To Your Computer (Macintosh)

    Chapter 2 Downloading Images to Your Computer (Macintosh) This section explains how to download still images and movies to your computer (Macintosh). Although supplied software can not be used on the Macintosh, Macintosh computers can be used to view the “Software User Guide” (Acrobat Reader required under Mac OS 9).

  • Page 15: Connecting The Camera To A Computer And Downloading Images

    When the contents of the internal memory are displayed, the drive name is [RICOHDCI]. • Do not turn off the camera or disconnect the Connect the USB cable to the USB USB cable during image transfer. The files will terminal of your camera. not be written correctly. • Do not use the computer to format the SD memory card or the internal memory. Use the camera to format the SD memory card or the internal memory. • Be sure to stop the connection before removing the USB cable. • Only one Ricoh digital camera can be connected to one computer. Do not connect Your camera turns on. multiple Ricoh cameras to one computer at the Your computer automatically reads the file same time. necessary for recognizing the camera as a drive. After this preparation, the camera is displayed as a drive on the Desktop. • When downloading images from your camera, load a battery with adequate remaining power in the camera.

  • Page 16: Disconnecting The Camera From Your Computer

    Disconnecting the Camera Downloading Images from an from Your Computer SD Memory Card It is possible to download images from an SD Drag and drop the displayed drive memory card to computer via a PC card slot or or volume icon to the [Trash] icon. card reader. When a screen appears prompting you to Images in an SD Memory Card enter the administrator's password, enter the password. Images are stored on an SD memory card in a hierarchy, as shown here. Unplug the USB cable.

  • Page 17: Chapter 3 How To Use Ec1

    Chapter 3 How to Use EC1 EC1 is an edit detection software program that allows you to check and view whether still images taken using the G700SE have been processed or edited. In order to carry out edit detection using EC1, you must set [Edit Detection] to [On] in the camera’s shooting setting menu before shooting and download the images to your computer.

  • Page 18: Using The Edit Detection Function

    Using the Edit Detection • Neither of the above icons is displayed with images taken when [Edit Detection] Function was set to [Off ] or images for which edit detection is not possible. You can only carry out edit detection using EC1 • By double-clicking an image in the after setting [Edit Detection] to [On] on your Thumbnail View, you can open the camera, shooting still images, and downloading image using the linked viewer software. the images to your computer. • If a space occurs at the beginning or end of the folder name, a message will Set [Edit Detection] to [On] in the appear and no images will be displayed. camera’s shooting setting menu, and shoot still images. For operation procedures, see the “Camera • Edit detection is available only with User Guide”.
  • Page 19 Chapter 4 Shooting with Camera Memos You can attach camera memos (information such as shooting conditions) to the still images you shoot. This section explains camera memos. • Be sure to set the date and time on the camera. • To use the camera memo function, DC Software must be installed. • Memos are not available with SD WORM memory cards. • The camera memo function is only for use with Windows. Use ME1 to view and edit the memos that have been appended to photographs (GP.40).

  • Page 20: Shooting With Camera Memos

    Section 1 About Camera Memos Shooting with Camera Memos The image file storing the image shot with a digital camera has an area where additional information can be stored. The camera memo Image function uses this area to allow you to attach a Image file memo to the still image you shoot. Memos make photographs easy to identify and Additional classify. information Camera memo • Photographer • Memos can not be added to movies. • Location, etc. • Memos can not be added to photographs taken with [On] or [WB-BKT] selected for [Auto Bracket] in the camera shooting menu. Memos Memos consist of a list of “items” (tags), each with its own “description” (contents). Memos can be added to photographs by pressing the ADJ./MEMO button and selecting the desired descriptions in the camera memo dialog before shooting. Camera Memo 9999 9999 4:3 F 4:3 F FileName/SAMPLE Client...

  • Page 21: Using Memos

    Using Memos Create a memo list on the computer and transfer it to the camera (GP.). Use the supplied List Editor application to create and transfer to the camera a memo list file (extension “.mta”) containing memo item names and descriptions. Take photographs with memos (GP.). Press the ADJ./MEMO button to display the camera memo dialog (GP.27). After choosing descriptions, press MENU/OK to create a memo which will be added to all new photographs (if desired, the contents of the memo can be changed after shooting; GP.29). The following types of memo are available: 1 Text (GP.) 3. Location Temporary Choose from up to 99 text descriptions created with the Record List Editor. Exterior Entryway Kitchen Living room Bedroom Bathroom Cancel...
  • Page 22 Transfer the photos to the computer (G Copy the photos to the computer using the supplied DL-10 software. View and edit memos (G P.40 Use the supplied ME1 software to display photographs, view and edit memos, and play voice memos. • Memos will be added to all photographs taken while a memo list file is present in the camera’s internal memory or on the memory card inserted in the camera. • For information on installing the supplied software, see the “Software User Guide”. • The supplied software is available for Windows only.

  • Page 23: Section 2 Creating And Transferring A Memo List

    Section 2 Creating and Transferring a Memo List Creating a Camera Memo List The List Editor Dialog To create a camera memo list, use the provided software List Editor. To create a memo list, first create a list of up to 20 items and then create up to 99 descriptions for each item. • A camera memo list file in CSV format created by a different application can be read into the List Editor and saved on an SD memory card for use by the camera. • To read a csv format camera memo list file into List Editor, select [Open] from the [File] menu Item Description of List Editor, and then specify the file name. 1 Menu bar Operations that can be performed Starting and Exiting List Editor using the menus include saving, editing, and transferring memo lists.

  • Page 24: Using The List Editor

    Using the List Editor The List Editor is used to create a memo Item names can be up to 20 characters long. list containing up to 20 items with up to 99 The following characters can not be used: \ / : ? descriptions for each item. * " < > |. Note that the presence of any of these characters, commas, or multiple periods may Choose the number of items in the corrupt the display of item names in Russian- memo list. language operating systems. Select [Number of Items] from the [File] Enter descriptions. menu. Select a name in the item list and edit the descriptions for the selected item. Choose the number of items from [5] (the default setting), [10], and [20]. If desired, the number of items can be changed after Enter descriptions in the [Input] text the memo list is created; note, however, box, and click [Add] to add them to the that if the list contains more items than the end of the input list. Changes to existing new maximum, the excess items will be descriptions can be made by clicking the deleted. description and then clicking one of the Enter item names.
  • Page 25 Complete the memo list. Repeat Steps 2 and 3 to complete the To edit an existing memo list, open it using memo list. the [Open] option in the [File] menu. After editing the list, save it using the [Save] Save the memo list. option in the [File] menu or by clicking the Select [Save As] in the [File] menu (memo button in the toolbar. lists can also be saved by clicking the button in the toolbar). Confirm that [mta Files (*.mta)] is selected for [Save as type] (memo lists can be saved as CSV files, but the mta format must be used for memo lists intended for transfer to the camera). After navigating to the desired location and entering a file name of up to eight characters, click [Save] to save the memo list. Note that the camera can display only file names consisting entirely of unaccented (low ASCII) roman characters. Although lists can be transferred directly to the camera without being saved, we recommend that you save the file before transfer.

  • Page 26: Transferring A Memo List File To The Camera

    Transferring a Memo List File Card Readers to the Camera A card reader can be used to copy a memo list file directly to the camera from the computer. Memo list files can be transferred to the camera Copy the file to the [TEMPLATE] folder on the from the List Editor or using a card reader. memory card. A [TEMPLATE] folder is created automatically when a card is formatted in the The List Editor camera. Start the List Editor and connect the camera. After starting the List Editor, connect the camera as described on P.6. Exit DL-10 if it starts when the camera is connected (GP.9). Transfer the memo list file. Click the [ Transfer to Camera] icon in the toolbar or select [Transfer to Camera] in the [Tools] menu. If a memory card is inserted in the camera, the file will be...

  • Page 27: Section 3 Taking Photographs With Memos

    Section 3 Taking Photographs with Memos Recording Memos with Multiple Memo List Files If the camera contains more than one memo list Photographs file, press DISP. to display a list of files. Press ! or " to highlight a file and press MENU/OK to Before proceeding, confirm that a memo list file select. has been transferred to the camera’s internal memory or to the memory card inserted in the FILE LIST camera. SAMPLE01 Adding Memos to New Photos SAMPLE02 SAMPLE03 SAMPLE04 Select 5/V mode and press SAMPLE05 ADJ./MEMO. SAMPLE06 SAMPLE07 The camera memo dialog will be displayed.

  • Page 28: Choosing Descriptions

    Choosing Descriptions [Mode2] When the camera memo dialog is first Descriptions can be selected in the camera displayed, the description for each item will be memo dialog. The method used depends on set to the first entry in that item’s description the option selected for [Camera Memo Mode] in list. Press $ once to set the description for each the camera memo menu. item to the second entry in the description [Mode1] list, twice to set the description for each item to the third entry in the description list, and Highlight an item. so on. Press # to return to the previous set of Press ! or " to highlight an item. descriptions. View descriptions. Camera Memo 1/45 Press $ to view descriptions for the highlighted item. FileName/SAMPLE Client Company A 3. Location Const.type Foundation work Location Exterior Temporary Supervisor Beverly Beech Record...

  • Page 29: Viewing Memos

    Viewing Memos Editing Memos Display the desired photo in Follow the steps below to view and edit photos that have been added to photographs. playback mode. Photographs to which memos have been added are indicated by a “MEMO” icon. • Memos can not be deleted. Press ADJ./MEMO. • Camera memos can only be edited as described below when [Mode1] is selected for The memo will be displayed as shown [Camera Memo Mode] in the camera memo below. menu. In Mode2, memos can be displayed by Camera Memo pressing DISP. during playback but can not be edited. FileName/SAMPLE Client Company A Viewing Memos Const.type Foundation work Location Exterior Display the desired photo in Supervisor...

  • Page 30: Creating A Temporary Memo

    Creating a Temporary Memo Select [Yes]. Press # or $ to highlight [Yes] and press Memo descriptions can be created on the MENU/OK. camera (either by editing existing descriptions or creating entirely new descriptions) and the resulting “temporary memo” appended to new photos. Temporary memos can be created in both shooting and playback mode. • Temporary memos are not stored in the memo list after the camera is turned off. • Temporary memos can be created using barcodes (GP.36). • Temporary memos are available only when Create a temporary description. [Mode1] is selected for [Camera Memo Mode] in the camera memo menu. An on-screen keyboard will be displayed. Use the keyboard to enter a temporary Creating a Temporary Memo description as described on P.49. To create a temporary memo, display the Camera Memo camera memo dialog and follow the steps below. Select an item.

  • Page 31: Editing The Temporary Memo

    Editing the Temporary Memo Creating a Temporary Memo from an Existing Memo Select an item. Create a temporary memo by editing an In the camera memo dialog, press ! or " existing memo. to highlight an item for which you have created a temporary description and press Select an item. $ to view descriptions for the highlighted Press ! or " to highlight an item in the item. camera memo dialog and press $ to view descriptions for the highlighted item. Select a temporary description. Temporary descriptions are indicated by a Select a description. “+”. Press ! or " to highlight a temporary Press ! or " to highlight a description description and press $. and press $. 3.

  • Page 32: Memo Increment

    Memo Increment Select a description that ends in a number. If a memo description ends in a number, Press ! or " to highlight a description you can increase or decrease the number by that ends in a number and press $ to pressing ! or ". display the memo increment dialog. Camera Memo No.102 Memo increment is available only when [Mode1] is selected for [Camera Memo Mode] in the camera memo menu. Using Memo Increment Transfer to the camera a memo list file containing descriptions that end in numbers Change Number and follow the steps below. Cancel Select [On] for [Memo Increment]. A warning will sound if you select a Select [On] for [Memo Increment] in the description that does not end in a number. camera memo menu. Edit the number.

  • Page 33: Using Memo Increment With Temporary Memos

    Voice Memos Using Memo Increment with Temporary Memos Each item in a memo can have as a description Memo increment can be used with temporary an audio recording of up to 30 seconds in memos. length. Voice memos can be created and edited in both shooting and playback mode. Create a temporary description that ends in a number (GP.0). • Voice recordings are deleted from the memo Select [On] for [Memo Increment]. list when the camera is turned off. Voice Select [On] for [Memo Increment] in the recordings already stored in memos that have camera memo menu. been appended to photos are not affected. • Voice memos can be played back on the Select the item. computer when photographs are displayed in the supplied ME1 software.

  • Page 34: Playing Voice Memos

    Record a voice memo. Press the shutter-release button to begin • Do not obstruct the microphone during recording. recording. Keep microphone within 20 cm 00:00/00:30 (7.8 in.) of the source. • Voice memos are not available with matrix barcodes. The [Record] option is not displayed in the description list when a matrix barcode type is selected. Playing Voice Memos Voice memos can only be played back in playback mode. Shutter button: Start :Cancel Select an item for which a recording exists. Recording ends after 30 seconds or when the shutter-release button is In the camera memo dialog, press ! or " pressed halfway. The description list to highlight an item marked with a v icon will be displayed with a $ icon next to and press $ to view descriptions for the the [Record] option (in playback mode, highlighted item.

  • Page 35: Re-Recording Voice Memos

    Play the recording. Re‑recording Voice Memos Press the shutter-release button to play the Follow the steps below to edit voice memos in recording. shooting mode. Playback ends when the end of the Select an item for which a recording is reached or when the shutter- recording exists. release button is pressed halfway. A confirmation dialog will be displayed. In the camera memo dialog, press ! or " to highlight an item for which a recording To re-record the memo as described in exists and press $ to view descriptions for Step 3 of “Recording Voice Memos, ” press the highlighted item. # or $ to highlight [Yes] and press MENU/ OK. Select [No] to return to the description 3. Location list without modifying the recording. Temporary Record Exterior Entryway Kitchen Living room Bedroom Bathroom...

  • Page 36: Registering Barcode Data As A Temporary Memo

    Registering Barcode Data as a Reading a Barcode and Registering Barcode Data Temporary Memo Shooting Mode The camera can read barcodes and store the data as temporary descriptions for temporary Press the ADJ./MEMO button. memos. Barcodes can be read in both shooting The [Camera Memo] screen appears. and playback mode. Point the camera toward the barcode you want to read and press • The camera can read linear barcodes of up to the # button. 32 digits and matrix barcodes of up to 2400 The camera switches to macro mode and digits. The barcode type can be selected using...
  • Page 37 Press MENU/OK to accept the new Non-ASCII characters in the barcode data will be replaced by asterisks (“*”). memo. The new memo will be recorded with the When [Barcode Mode] is set to next photograph taken. [Mode], you can repeat Step 4 and To delete barcodes read with [Mode3] read additional barcodes. selected for [Barcode Mode], highlight the Press the MENU/OK button to first item in the camera memo dialog and press $ to display the description list. Press confirm the camera memo. ! or " to highlight [No Setting] and press Press the MENU/OK button.

  • Page 38: Image Memos

    Image Memos Copy the image to the camera. Copy the image to the [TEMPLATE] folder To use still images as memos, include a in internal memory or on the camera description with an image file name when memory card. creating the memo list. Note that the image file must first be copied to the camera memory card or internal memory. Image memos can be viewed only when [Mode2] is selected for [Camera Memo Mode] in the camera memo menu. No image will be displayed if a file with the selected name can not be found. First Steps Enter the image file name as a description. Using the supplied List Editor application, enter the file name of the desired image as a description for the last item in the item list (GP.23). Image memos must satisfy all the following criteria: • File type: JPEG • Color space: YCbCr 4 : 2 : 2 or 4 : 2 : 0 • Dimensions (W ×...

  • Page 39: Viewing Image Memos

    Viewing Image Memos Playback Mode To view an image memo that has been Shooting Mode appended to a photograph, display the To view image memos, press ADJ./MEMO in the photograph and press ADJ./MEMO. camera memo dialog. Press ADJ./MEMO again to return to the camera memo dialog. Camera Memo 1/45 Client Client Company A Company A FileName/SAMPLE Const.type Const.type Foundation work Foundation work Location Location Exterior Exterior Client Company A Supervisor Supervisor Beverly Beech Beverly Beech Const.type Foundation work...

  • Page 40: Section 4 Viewing/Editing A Camera Memo On A Computer

    Section 4 Viewing/Editing a Camera Memo on a Computer Using ME1 Editing Memos To edit the memo for a selected photo, double- Once photographs have been transferred to click the icon in the thumbnail list. The edit the computer, the supplied ME1 software can dialog will be displayed. be used to display photographs, view and edit memos, and play voice memos. Select [Programs] (or [All Programs]) > [DC Software] > [ME1] from the Windows [Start] menu to start the software. The ME1 Window Item Description 1 Item A list of the items in the memo. 2 Voice memo The icons for items that contain voice Item Description icons memos are displayed in red. 1 Menu bar Operations that can be performed 3 Memo The descriptions for the items in the...

  • Page 41: Printing Memos With Photographs

    Three photos printed with memos on an A4 sheet C:myPicture 2010/0101 • No photographs will be displayed if a space Category01 Cameramemo01_01 Category02 Cameramemo02_01 Category03 Cameramemo03_01 Category04 Cameramemo04_01 occurs at the beginning or end of the folder Category05 Cameramemo05_01 Category06 Cameramemo06_01 Category07 Cameramemo07_01 Category08 Cameramemo08_01 name. Edit the folder name. Category09 Cameramemo09_01 Category10 Cameramemo10_01 RIMG0001.jpg 2010/0101 • Note that the presence of commas, multiple Category01 Cameramemo01_01 Category02 Cameramemo02_01 periods, or any of the following characters may Category03 Cameramemo03_01 Category04 Cameramemo04_01 Category05 Cameramemo05_01 Category06...

  • Page 42: Section 5 Using Memos To Sort Photos

    Section 5 Using Memos to Sort Photos Using EX1 Starting and Exiting EX1 EX1 for Server The supplied EX1 software can be used to: When installed using the default installation • Rename photographs or organize options, EX1 resides permanently in the system photographs into folders using memo tray. To close EX1, click the icon in the system data, allowing you to get an idea of memo tray and select [Quit]. contents from the image file names • Export memos in CSV, XML, or TXT format EX1 is available in client and server versions. The server version (“EX1 for Server”) continuously monitors a selected source folder for new images and automatically processes them as they are added to the folder. The client version (“EX1 for Client”) does not process images automatically. To restart EX1, select [Programs] (or [All Programs]) > [EX1 for Server] from the Windows EX1 Operation Flow [Start] menu.

  • Page 43: Transfer Settings

    Transfer Settings EX1 for Client Select [Programs] (or [All Programs]) > EX1 for Server [EX1 for Client] > [Setting] from the Windows Clicking the EX1 icon in the system tray with [Start] menu. the right mouse button displays the following transfer settings dialog. Item Description 1 Transfer From Click [Browse…] to choose the Item Description folder containing the images you intend to process. 1 Transfer Click [Browse…] to choose the From watched folder. 2 Process Choose how photographs will be processed as described under 2 Process Choose how photographs will be “EX1 for Server. ” processed. • Camera memo extraction: Rename 3 Save To Click [Browse…] to choose a files according to memo contents...
  • Page 44 Process > Detail Camera Memo Extraction > Export Format Clicking [Detail...] in the [Process] panel displays the following dialog. Select the format or formats that will be used to export memos. Memos will not exported if no options are selected. The items in the setting information list depend Camera memo category > Transfer Mode on the option selected in the [Process] panel. To change settings, highlight an item in the setting information list and click [Change...]. Camera Memo Extraction > Rename Syntax Choose whether folder names will consist of the item name and description separated by an underscore (“_”) or simply the description. Example: Given the following camera memo… Choose the memo items that will be used to rename files. If multiple items are selected, they Item Name Description will be separated by an underscore (“_”) in the Item 1 Description A file name.

  • Page 45: Processing Photos

    Processing Photos Property To open the EX1 for Server properties dialog, EX1 for Server right click the EX1 icon in the system tray. If folder monitoring is enabled, EX1 will monitor the folder selected in the transfer settings dialog and automatically process images as they are added to the folder. Disable folder monitoring to prevent images from being processed automatically. Item Description 1 Setting for Choose whether folder monitoring is application enabled by default. If a transferred file is found to be damaged or launching corrupt, a message will be displayed and transfer will end automatically. 2 Enable the Choose whether a log file will be output of created when images are transferred. EX1 for Client transfer log • Browse…: Choose a destination for Select [Programs] (or [All Programs]) > the log file. [EX1 for Client] > [Transfer] from the Windows • Maximum file size: Choose the [Start] menu. If [Display confirmation dialog maximum size for the log file.

  • Page 46: File Information

    File Information <?xml version="1.0" encoding="Shift_JIS"?> <Exif> The information below is included in files <APP1> created using [Export Format]. <Exif_IFD> This example assumes that the following file is <DateTimeOriginal>2010:10:10 00:00:00 transferred: </DateTimeOriginal> </Exif_IFD> File Description <GPS_IFD> Item Content <GPSLatitudeRef>N</GPSLatitudeRef> Date of recording 2010.10.10 00:00:00 <GPSLatitude>00:00:00</GPSLatitude> GPS data None <GPSLongitudeRef>E</GPSLongitudeRef> <GPSLongitude>00:00:00</GPSLongitude> Memo Contents </GPS_IFD> </APP1> Item Name Description <APP5> Item 1 Description A <CameraMemo1> Item 2 Description B <MemoItem1>Item 1</MemoItem1> Item 3 Description C <MemoData1>Description A</MemoData1>...
  • Page 47 CSV Format TXT Format Main Tag Name Content Main Tag Name Content DateTimeOriginal Shooting date of the image file DateTimeOriginal Shooting date of the image file GPSLatitudeRef Latitude (N or S) GPSLatitudeRef Latitude (N or S) GPSLatitude Latitude (Numeric value) GPSLatitude Latitude (Numeric value) GPSLongitudeRef Longitude (E or W) GPSLongitudeRef Longitude (E or W) GPSLatitude Longitude (Numeric value) GPSLatitude Longitude (Numeric value) (Memo item The above information is CameraMemo1– Memo item names and names and followed by the memo item CameraMemo5 descriptions descriptions) names and descriptions. [DateTimeOriginal] DateTimeOriginal,2010:10:10 00:00:00 2010:10:10 00:00:00 GPSLatitudeRef,N [GPSLatitudeRef ]...

  • Page 48: Appendices

    Appendices...

  • Page 49: How To Use The Keyboard

    How to Use the Keyboard To use the keyboard, follow the steps below. Memo area Camera Memo [Delete] [Space] < > & ” ’ Shift Cancel Keyboard area Enter a description of up to  characters. Highlight characters using !, ", #, or $ and press MENU/OK to enter the highlighted character at the current cursor position (to delete the character at the current cursor position, select [Delete]). Press D to shift between upper and lower case. To exit without changing the description, press the DISP. button. Press ADJ./MEMO. Press ADJ./MEMO to save the description and exit the keyboard entry dialog.

  • Page 50: Troubleshooting

    Troubleshooting Problem 1 Cannot download images Solution 1 Your camera may not be recognized correctly if you connect to the USB Port of your computer via a USB hub. Follow the steps below to change the USB port. • Connect your camera directly to the USB port of your computer. • If there are several root hubs, change to another hub. If you are using a non-USB hub, try connecting via a USB hub. Solution  The battery in the camera may have worn out. Before downloading images from your camera, load a battery with adequate remaining power in the camera. Solution  The free space on the hard disk in your computer may be insufficient. Check whether the hard disk has sufficient space for running Windows, and whether the drive where you are loading image files has the same capacity or more as that of the SD memory card inserted in the camera. Problem  Even if you check [The same image will not be saved] in the DL-10 [Option settings], the same images are loaded into your computer.

This manual is also suitable for:

G700

Table of Contents