HP ProBook 4710s Maintenance And Service Manual page 89

4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Memory module (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. Hard drive (see
g. WLAN module (see
h. Display assembly (see
i. Top cover (see
j. Heat sink and fan (see
Remove the processor:
1. Position the base enclosure, with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle (4) embossed on the processor socket.
Reverse this procedure to install the processor.
Battery on page 41).
Switch cover and keyboard on page
Memory module on page
Optical drive on page
Speakers on page 49)
Palm rest on page 50)
Hard drive on page 52)
WLAN module on page
Display assembly on page
Top cover on page 65)
Heat sink and fan on page
45)
47)
55)
59)
74)
Component replacement procedures
42)
79