Display Assembly - HP ProBook 4710s Maintenance And Service Manual

Display assembly

NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description
17.3-inch, HD+ BrightView display assembly with camera
17.3-inch, HD+ BrightView display assembly
17.3-inch, HD+ display assembly with camera
17.3-inch, HD+ display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover (see
b. Keyboard (see
c. Speakers (see
d. Palm rest (see
Remove the display cable:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer as far as possible.
3. Disconnect the display panel cable (1) from the system board.
4. Disconnect the camera and microphone module cables (2) from the system board, and then
remove the cables from the routing path (3).
Battery on page 41).
Switch cover and keyboard on page
Switch cover and keyboard on page
Speakers on page 49)
Palm rest on page 50)
Spare part number
535777-001
535779-001
535778-001
535776-001
42)
42)
Component replacement procedures 59