Bluetooth Module - HP ProBook 4710s Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 535757-001.
Description
Bluetooth 2.0 module
Bluetooth 2.1 module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the Bluetooth module cable (2) from the routing path.
3. Remove the Bluetooth module from the clip (3) that secures it to the base enclosure.
54 Chapter 4 Removal and replacement procedures
Battery on page
Switch cover and keyboard (see
Palm rest (see Palm rest on page
Hard drive (see Hard drive on page
41).
Switch cover and keyboard on page
50)
52)
Spare part number
398393-002
537921-001
42)