With Transfer Requests Set In The System Settings Menu - Ricoh 3030 Operating Instructions Manual

Reference
p.35 "T.37 Full Mode"
p.56 "Sending Over a Fax Line"
p.59 "Sending by IP-Fax"
p.63 "Sending to an E-mail Address"
p.68 "Using the Address Book to Specify Destinations"
p.130 "Sub Transmission Mode"
p.167 "Transfer Result Report (transfer request by e-mail)"
p.289 "Maximum Values"
"Facsimile Features", General Settings Guide

With transfer requests set in the System Settings menu

You can program a Destination key with Transfer Station and/or Receiving Sta-
tion under Program / Change / Delete Transfer Request in the System Settings
menu.
A
Place the original, and then select the scan settings you require.
B
Press the key programmed with Transfer Request.
C
Press the {Start} key.
Reference
"System Settings", General Settings Guide
Advanced Features
101
1