HP Compaq Presario CQ62 Maintenance And Service Manual page 87

4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Speaker assembly (see
f. Display assembly (see
Remove the following cables from the system board:
●
Power connector cable (see
●
USB board cable (see
1. Turn the computer upright with the right side toward you.
2. Remove the three Phillips PM2.5×4.0 (1) screws that secure the system board to the computer.
3. Grasp the right edge (2) of the system board.
4. Lift the system board (3), and pull it away from the base enclosure at an angle.
Reverse this procedure to install the system board.
ENWW
Battery on page 46).
Hard drive on page 47)
Optical drive on page
Keyboard on page 57)
Top cover on page 59)
Speaker assembly on page
Display assembly on page
Power connector on page
USB board on page
50)
62)
70)
69)
67)
Component replacement procedures 77