Usb Board - HP Compaq Presario CQ62 Maintenance And Service Manual

USB board

Description
USB board
Before removing the USB board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the USB board:
1. Position the computer upright with the right side toward you.
2. Disconnect the USB board cable (1) from the system board.
3. Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure.
4. Lift the USB board (3) straight up to remove it from the computer. The USB cable is available
with the cable kit using spare part number 595201-001
ENWW
Battery on page 46).
Hard drive on page 47)
Optical drive on page
Keyboard on page 57)
Top cover on page 59)
50)
Component replacement procedures
Spare part number
595205-001
67