Speaker Assembly - HP Compaq Presario CQ62 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Keyboard (see
c. Top cover (see
Remove the speaker assembly:
1. Turn the top cover upside down.
2. Remove the three Phillips PM2.5×3.0 screws (1) that secure the speaker assembly to the top
cover.
3. Lift up and remove the speakers (2).
Reverse this procedure to install the speaker assembly.
62 Chapter 4 Removal and replacement procedures
Battery on page 46).
Optical drive on page
Keyboard on page 57)
Top cover on page 59)
Spare part number
602744-001
50)
ENWW