Network Settings Submenu - HP UPS User Manual

Network Settings submenu

Option number
1
2
3
4
5
0
Remote Console submenu
Option number
1
2
0
Web Access submenu
Option number
1
2
0
SNMP submenu
Option number
1
2
0
SNMP Managers (NMS) submenu
Option number
1
Submenu
Static IP Address
Static Subnet Mask
Static Default Gateway
Toggle Boot Mode
Ping Utility
Previous Menu
Submenu
Protocol Selection
Telnet Configuration
Previous Menu
Submenu
Protocol Selection
HTTP/HTTPS Configuration
Previous Menu
Submenu
SNMP Managers (NMS)
SNMP Traps
Previous Menu
Submenu
IP Address
Description
Enables you to set the management module
IP address
Enables you to set the management module
subnet mask
Enables you to set the management module
default gateway
Enables you to toggle the boot mode
between DHCP and Static IP
Pings the management module
Returns to the previous menu
Description
Enables you to select telnet
Enables you to configure the port for telnet
Returns to the previous menu
Description
Enables you to select HTTP or HTTPS
Enables you to configure the port for HTTP or
HTTPS
Returns to the previous menu
Description
Enables you to select an entry to configure
the SNMP managers (computers that use the
HP Power MIB to request information from the
management module)
Enables you to select an entry to configure
the SNMP traps receiver
Returns to the previous menu
Description
Enables you to enter or change the IP
address of the SNMP manager
HP UPS Management Module Service Menu 86