Installing The Agent On Sles 10 - HP UPS User Manual

•
Change any items that should be unique, such as the Management Server IP address, through the
normal operation of the software.
To install the agent using the silent installation method:
Create a temporary directory.
1.
Copy the following files into the temporary directory you just created:
2.
DevManRA.ini—During an assisted install, this file is landed in the same folder in which the
o
agent is installed.
EULA.txt—This file is included with the installation files on the HP Infrastructure Management Pack
o
CD and the software download package on the HP website
(http://www.hp.com/go/rackandpower).
SetupRA—This file is included with the installation files on the HP Infrastructure Management
o
Pack CD and the software download package on the HP website
(http://www.hp.com/go/rackandpower).
Uninstall—This file is included with the installation files on the HP Infrastructure Management
o
Pack CD and the software download package on the HP website
(http://www.hp.com/go/rackandpower).
HPRA-4.5-x.i586.rpm—This file is included with the installation files on the HP Infrastructure
o
Management Pack CD and the software download package on the HP website
(http://www.hp.com/go/rackandpower).
From the directory that contains all five files, run ./SetupRA -s -f <path> DevManRA.ini to
3.
install silently.
Replace <path> with the DevManRA.ini file location.
The following command line parameters can be specified and are applicable for both interactive and
silent modes.
Parameter
-s
-log
-f DevManRA.ini

Installing the agent on SLES 10

Install the agent using the Linux installation script
1.
on page 35).
-or-
Install the agent using the Linux silent installation method
installation
Do one of the following:
2.
Function
Specifies a silent install.
Creates an installation log
(/user/local/DevMan/install.log). Default is
disabled for interactive mode and enabled for
silent mode. This option is supported only on
Linux. The installation log is created automatically
for Windows® during silent installations in
\%systemdrive%\setup.log.
Specifies a configuration .ini file used for clean
installs. When this option is specified, the device
detection and configuration step is omitted.
method" on page 36).
("Installing the agent using the installation
("Installing the agent using the silent
Installing the HP UPS Power Protection Agent 37
script"