Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing...
2. Electrical safety a. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. SKU 68394...
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions SKU 68394 For technical questions, please call 1-800-444-3353. Page 3...
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 4 For technical questions, please call 1-800-444-3353. SKU 68394...
2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Note: Extension cords must not be used with this item’s adapter. SKU 68394 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 11. Work Light Switch Work Light Forward Trigger Magnetic Chuck Reverse Trigger Page 6 For technical questions, please call 1-800-444-3353. SKU 68394...
NOTE: The Work Light will activate once the Forward or Reverse Trigger is pressed. 4. Engage the Screwdriver bit over the item being turned. The bit size must match the size of the screw. SKU 68394 For technical questions, please call 1-800-444-3353. Page 7...
Front Gear Lens Cnter Bracket Rear Gear Resistor Gasket Belt Motor Terminal Cover Self-Tapping Screw Motor Screw Self-Tapping Screw Motor Gear Clasp Motor Charger Housing 1 set Bit (PH2, 2”) Page 8 For technical questions, please call 1-800-444-3353. SKU 68394...
Page 10
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.