Convection Oven; Surface Units - GE C5980 Owner's Manual

GEAppliances.com
CONVECTIONBAKE ]
START
CLEAR
OFF J
Auto Recipe'" Conversion
You can use your favorite recipes in the
convection oven.
When using Convection Bake, the oven can
automatically convert the oven temperature
from regular baking to Convection Bake
temperatures.
To activate the feature:
FT] Touch the lower oven Warm and Bake
pad at the same time until the display
shows SF.
[] Touch the Convection Bake pad. The
display will show Con OFF. T ouch the
Convection Bake pad again. The display
will show Con On.
r_ Touch the Start pad.
[] Using the number pads, enter the
temperature recommended in the recipe.
r_ Touch the Start pad.
The display will show the actual
converted (reduced) temperature. For
example, if you enter a regular recipe
temperature of 350°F (177°@and touch
the Start pad, the display will show CON
and the converted temperature of 325°F
(163 °C).
NOTE:This feature only converts cooking
temperatures, not cooking times.
When convection roosting, the oven
temperature will not auto convert.
[] Touch the Clear/Off pad when baking is
finished.
Usepan size recommended in the recipe.
_, S ome package instructions for frozen
casseroles,main dishes or baked goods
have been developed using commercial
convection ovens. For best results in
this oven, preheat the oven and use the
temperature, for regular baking, on the
package.
To deactivate the feature:
Touch the lower oven Worm and Bake
pad at the same time until the display
shows SF.
Touch the Convection Bake pad. The
display will show Con On. Touch the
Convection Bake pad again. The display
will show Con OFF.
[]
Touch the Start pad.
i i i i i I:II i ii
Range
Lockout
Your control will allow you to lock out the
surface units,oven burners and control panel so
they cannot be activated.
To lock/unlock the controls:
E]_] Turn all surface units off.
Touch the RANGELOCKOUTpad and
then the STARTpad.
To unlock the control, touch the RANGE
LOCKOUTpad and then the STARTpad.
When this feature is on and the touch pads are
touched, the control will beep and the display
will show LOC.
}_ The control lock-out mode affects all
controls. No controls will work when this
feature is activated.
}_ The adjustment will be retained in memory
after a power failure.
27