GE Appliances Quickset III Owner's Manual page 7

Using the surface units, ion some mode_sI GEApUionces.c
jA WARNING
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings. Keep flammable items away from the cooktop. Turn off all controls when
done cooking. Failure to follow these instructions can result in fire, serious injury or
death.
Throughout this manual, features and appearance may vary from your model.
JFF
i ii:>_ i_, ¸
At both OFF and HI the
control clicks into position.
You may hear slight clicking
sounds dur!ng cooking,
indicating the control ss
maintaining your desired
setting.
Be sure you turn the control
knob to OFF when you finish
cooking.
How to Set
Pushthe knob in and turn in either direction to
the setting you want.
A surface ON indicator light will glow when any
surface unit is on
For gloss cooktop surfaces:
A HOT COOKTOP indicator light will:
come on when the unit is hot to the touch.
stay on even after the unit is turned off.
stay on until the unit is cooled to
approximately 150°F.
iill iilk ii ii
Rear
Melt setting (on some models) will melt
chocolate or butter. Simmer setting (on some
models) will simmer sauces.
ii Z_,x ) f
!_ii!!_ ¸
FBONIF
Onsomemodels.
SMALL LABGE
BUe.ER O FF ....E.
8
LO 2
Onsomemodels.
Dual and Triple Surface Units
and Control Knobs (onsomemodels)
The surface unit has 2 or 3 cooking sizes
to select from so you can match the size
of the unit to the size of the cookware you are
using.
Hi _
Lo
O
Models with a Tri-Ring surface
element only.