GE Appliances JGB850 Owner's Manual And Installation Instructions page 46

Installation Instructions
[_ SEAL THE OPENINGS
Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.
[_ ASSEHBLE SURFACE BURNERS
rA1 Burner Heads (on some models)
Place burner heads over the electrodes on the cooktop, in
the correct
locations
according to
their size.There
is one small,
one medium,
one large and
one extra-large
burner head..
_els/
Front of range
(onsomemodels)
Triple flame head
IVlakesure the slot in the
burner head is positioned
over the electrode.
Electr_Slot or
r_ Oval (center) Burner Head/Cap Assembly
Placethe oval (center) head/cap assembly over the
electrode on the cooktop.
Oval head and cap
assembly
Front of range
Make sure the slot in the
burner head is positioned
over the electrode.
Electrode
[_ ASSEHBLE SURFACE BURNERS (CONT.)
o
Fr0nt0frange ! 1;_2 _22
Tll-l_ L_U_
(0n So_e m0dels)
B]
E1
Oval (Center) Burner Head/Cap Assembly
Placethe oval (center) head/cap assembly over the
electrode on the cooktop.
Caps
Placethe matching size caps onto the burner bases
or heads.
Make sure that the heads (on some models) and caps
are replaced in the correct locations.
El Grates
Single Grates
Locator Bumps
Single grates only fit one way. Locator bumps need to
face each other.
Double Grates
Left-Front Center Right-Front
Placethe left, right and center grates on the cooktop.
These grates are position specific.The undersides of
the left and right grates are marked "LEFTFRONT"
and "RIGHTFRONT." O n some models the underside
is labeled "OUTSIDE." P lacethe middle grate with its
bowed front (on some models) toward the front of the
range.
[ kCAUTION]
Do not operate the burner
without all burner parts in place.
46