Oven Light Replacement; Oven Racks - GE Appliances CS980 Owner's Manual & Installation Instructions

Care and cleaning of the range,
Oven Racks and Drawer Racks
Clean the racks with an abrasive cleanser.
The oven racks may be cleaned in the
self-cleaning oven. However, the racks
will darken in color, losetheir luster and
become hard to slide if cleaned during
the self-cleaning cycle.
To
make the racks slide more easily, apply
a small amount of vegetable oil or cooking
oil to a paper towel and wipe the edges
of the oven racks with the paper towel.
Wire coverholder.
Oven Light Replacement
CAUTION:
Before replacingyour
oven light bulb, disconnect the electrical power
to the range at the main fuse or circuit breaker
panel. Be sure to let the light cover and bulb cool
completely.
The oven light bulb is covered with a removable
glass cover that is held in place with a
bail-shaped wire. Removethe oven door, if
desired, to reach cover easily.
To remove:
%
Hold a hand under the cover so it doesn't
fall when released. With fingers of the
same hand, firmly push back the wire
cover holder. Lift off the cover.
Do not remove any screws to remove
the cover.
[] Do not touch hot bulb with a wet cloth.
Replace bulb with a/-tO-watt household
appliance bulb.
To replace cover:
%
Placeit into the groove of the light
receptacle. Pullthe wire forward to
the center of the cover until it snaps into
place. When in place, the wire holds the
cover firmly. Be certain the wire is in the
depression in the center of the cover.
Connect electrical power to the range.
36