GE Appliances CS980 Owner's Manual & Installation Instructions page 11

Using the surface units, GEApUionces.c
The following information will help you choose cookware which will give good performance on glass cooktops.
k ¸ : _ k C k
i i il iiiii! d i!i il
!!!'i!
Never cook directly on the glass.
Always use cookware.
Always place the pan in the center
of the surface unit you are cooking
on.
About the rodiont surface units...
The radiant cooktop features heating units
beneath a smooth glass surface.
NOTE:A slight odor is normal when a new
cooktop is used for the first time. It is caused
by the heating of new parts and insulating
materials and will disappear in a short time.
NOTE:On models with lighbcolored glass
cooktops,it is normal for the cooking zones to
change color when hot or cooling down. This is
temporary and will disappear as the glass cools
to room temperature.
The surface unit will cycle on and off to
maintain your selected control setting.
It is safe to place hot cookware on the glass
surface even when the cooktop is cool.
Evenafter the surface units are turned off, the
glass cooktop retains enough heat to continue
cooking. To avoid overcooking, remove pans
from the surface units when the food is cooked.
Avoid placing anything on the surface unit until
it has cooled completely.
Do not slide cookware across the cooktop
because it can scratch the glass-the glass
is scratch-resistant, not scratchpraof.
Water stains (mineral deposits)are removable
using the cleaning cream or fulhstrength
white vinegar.
Use of window cleaner may leave an
iridescent film on the cooktop. Thecleaning
cream will remove this discoloration.
Don't store heavy items above the cooktop. If
they drop onto the cooktop, they can cause
damage.
Do not use the surface as a cutting board.
11