Installation Instructions - GE JGBS04 Owner's Manual & Installation Instructions

Installation
Instructions
nge
If gou have questions, call 800.GE.CARESor visit our Website at: GEAppliances.com
I
BEFORE YOU BEGIN
Read these instructions completelg and
carefullLj.
Installation of this range must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI
Z223.1/NFPA.S4, latestedition. In Canada,
installation must conform with the current
Natural Gas Installation Code, CAN/CGA-B149.1
or the current Propane Installation Code,
CAN/CGA-B149.2, and with local codes where
applicable. This range has been desig n-certified
bg CSA International according to ANSI Z21.1,
latest edition and Canadian Gas Association
according to CAN/CGA-I.1 latest edition.
As with ang appliance using gas and generating
heat, there are certain safetg precautions gou
should follow. You will find these precautions in the
tmportantSafetg Information section in the front
of this manual. Read them carefullg.
• IMPORTANT - save these i nstructions
for !oca] inspector's use.
IM PORTANT -Observe
all governing
codes and ordinances.
Note to Installer - Be sure to leave these
instructions with the Consumer.
Note to Consumer - Keep these instructions for
future reference.
• Note-This appliance must be properlg
grounded.
• Servicer-The electrical diagram is n an
envelope attached to the back of the range.
° Skill Level - Installation of this appliance
requires basic mechanical skills.
Proper installation is the responsibilitg of the
installer.
Product failure due to improper installation is not
covered under the Warrantg.
27