GE J2B912 Installation And Owner's Instructions page 49

ge.com
Possible Causes What To Do
Control signals after You forgot to enter a hake * Touch tile BAKE pad and desired teml)erature or
entering cooking time
temperature or clem)hlg time.
tile SELFCLEAN
1):1(1 and desired clean time.
or start time
Fooddoes notbake or Oven controls improperly set. * See tire Using the oven section.
roast properly in the
Shelf position is incorrect. * See tire Using the oven section.
oven
Incorrect cookware or cookware
* See tire Using the oven section.
of improper size being used.
Oven thermostat needs * See tire
Adjust the oven thermostat--Do it
adjustment,
yourself[
secti_m.
Clock not set correctly. * See tire
Using the clock and timer
section.
Almnhlum foil used improperly * See tire Care and cleaning
of the
range secti_m.
in the oven.
Oven bottom not securely * See the
Installation of the
range section.
seated in position,
Fooddoesnotbmil
Oven controls improperly set. * Make stu'e you touch the
BROIL HI/LO
1):1(1.
properlyin the oven Oven door not closed, * See the Using the oven section.
Improper shelf position
* See the Broiling Guide.
being used.
Food being cooked ha a hot pan. * For best results, use a I)aU designed fin" broiling.
Make stu'e it is cool.
Cookware not suited for broiling. * For best results, use a I):111designed fin" broiling.
Oven bottom not securely
* See the
Installation of the
range section.
seated in position,
Oven temperature Oven thermostat * See the
Adjust the oven thermostat--Do it
too hot or too cold needs
adjustment,
yourself[ section.
Clock and timer Plug
on range is not completely * Make sure electrical plug is plugged into a live, l_roperly
do not work inserted ha the electrical outlet, grounded outlet.
A fuse in your home may be
* Replace
tire fl/se or reset tire circuit breaker:
blown or the circuit breaker
tripped.
Oven controls improperly set. * See tire Using the clock and timer section.
49
iiiiiiiiiiiiiii!!ii_ _
Iiiii ii i