GE J2B912 Installation And Owner's Instructions page 45

Installation Instructions
[] CHECK IGNITION OF SURFACE
BURNERS
Operation of all cooktop and oxen burners should be
checked after the range, and gas suppl_, lines haxe been
careflfll_ checked fi)r leaks.
Electric Ignition Models
Select a top burner knob and simultaneously push
in and turn to L1TE position. You will hear a clicking
sound indicating proper operation of the
spark
module. Once the air has been purged fl'om the
supply lines, burners should light within 4 seconds.
Afier burner lights, rotate knob out of the L1TE
position. Try each burner in succession until all
burners have been checked.
Quality of Flames
The combustion qualit)of burner flames needs to be
determined xisuallx.
(A) Yellow flames--
Call for service
(B) Yellow tips on
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flmxms look like (A), call for service. Normal
burner flmnes should look like (B) or (C), depending
on the type of gas you use.
X'_ith I,P gas, some x ellow till) )ing, on outer cones
is normal.
[] CHECK IGNITION OF OVEN BURNER
The oven is designed to ot)erate quietly and automatically.
To operate the oven, touch the BAKE pad and then touch
the nmnber [)ads until 350 ° appears in the display. Touch the
START pad. _Mter 30-90 seconds, the oven burner will ignite
and burn until the set temperature is reached.
Electric ignition models require electrical power to oi)erate.
In case of a t)ower outage, the men burners on these models
cannot be lit mammllv with a match. (',as will not flow unless
the glow bar is hot.
If the oxen is in use when a I)ower outage occurs, the burner
x_ill shut off and cam/ot be re-lit until power is restored.
45