GE J2B912 Installation And Owner's Instructions page 44

Installation instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter phtg in these situations because
disconnecting the power cord places undue strain on
the adapter and leads to eventual taihu'e of the adapter
ground terlninal. The customer should have the two-
i)rong wall receptacle replaced with a three-i)rong
(grounding) receptacle by a qualified electrician
befl_re using the ai)pliance.
The installation of ai_pliances designed fin" inobile
holne installation inust confln'in with the Malmlhctured
Home Construction and Safety Standard, Title 94 CFR,
Part 3280 (%rlnerly the Federal Standard %i" Mobile
Home Construction and Safety, Title 24, HUD, Part
280) oi, when such standard is not applicable, the
Standard for Mmmlhctured Home Installations, latest
edition (Mmmlhctured Home Sites, (_ommunities and
Set-Ui)s), ANSI A225.1, latest edition, oi" with local
codes. In Canada, mobile home installation must be
in accordance with the current CAN/CSA ZE40/MH
Mobile Home Installation Code.
Electric Disconnect
• i,ocate disconnect plug on the range back.
• Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Seal am, oi)enings, in the wall behind the ranoe_ and in the
floor under the ranoe_ when hookups are completed.
[] ASSEMBLE SURFACE BURNERS
[] Burner Heads (on some models)
Place burner heads over the electrodes o15
the cooktop, in the correct locations according
to their size. There is one slnall, one inedimn,
one large and one extra large burner head.
Med
Large head Front of rang_ _- Extra large
head
[] ASSEMBLE SURFACE BURNERS
(CONT.)
Make sure the slot
in the burner head
is positioned over _1
the electrode. _!
Electrode._ _" Slot
[] Oval (Center) Burner Head/Cap Assembly
Place tile oval (center) head/cap assembly over
the electrode on the cooktop.
Oval head and cap
assembly
• •
Front of range
Make sure the slot in the
burner head is positioned
over the electrode.
_ot
Electrode
[] Caps
Place the matching, size. caius onto the burner
bases
or heads.
[]
Front of range cap
Make sure that the heads (on some models) and
caps are replaced ill the correct locations.
Grates
Place the left, right and center grates on the
cooktop. These grates are position specific.
The undersides of the left and right grates are
inarked "I,EFT FRONT" and "RIGHT FRONT."
Place the iniddle grate with its bowed fi'ont
toward the fl'ont of the range.
Left Front Center Right Front
CAUTION:
Do not operate the burner
without all burner parts in place.
44