GE J2B912 Installation And Owner's Instructions page 28

Usingthe self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
@
GGQQQ
GGQGQ
@
QGQQG
GGQQQ
How to Belay the Start of Cleaning
Make sure tile clock shows tile correct time
of da}.
[] Touch tile
SELFCLEAN pad.
[] Using tile number pads, enter tile
desired clean time.
[] Touch tile DELAYSTART
pad.
Tile
earliest start time _ou can set will
appear in tile display
[] Using tile mmlber pads, enter tile
time of da} }ou want tile clean Qcle
to starL
[] Touch the
START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oxen door tmtil
the temperature drops below tile lock
teFaperature and the
LOCKED DOOR
light goes ofl_
\_]len tile LOCKED DOOR light is off; open
tile door_
After a Clean Cycle
Y_m may notice some white ash in the o_en.
Wipe it up with a damp cloth after the
o'_en cools,
If white spots remain, remove them with a
soap-filled scouringpad and rinse thoroughly
with a vinegarand water m/kture.
These deposits are usuallx a salt residue
that cannot be remoxed bx the clean cx cle,
If the oven is not clean after one clean
c) cle, repeat the c_cle,
iJi:: Y _m cannot set the oven till" cooking until
the oven is cool enough fiw the door to
unlock.
::Ji:: X_q_ile the oven is seltk'leaning, you
can touch the
CLOCK
pad to display
the time ot day, To return to the clean
countdown, much the
COOKING TIME
pad.
::Ji:: I f the sheNes become hard to slide, apply
a small amount of vegetable oil or cooking
oil to a paper towel and wipe the edges of
the oven shelves with the paper towel.
28