iiiiiiiiiii_iii!iili_iilii,!i
iiiiii{i i{/
Installationof therange.
Read these instructions completely and Carefully.
BeforeYou Begin
IMPORTANT: Save these instructions
for the local electrical
inspector's
use.
IMPORTANT? OBSERVE ALL GOVERNING CODES AND
ORDINANCES.
NOTE TOINSTALLER:Leave these instructions with the
appliance after installation is completed.
NOTE TO CONSUMER:Keep this Owner's Manual and
Installation Instructions for future use.
NOTE"This appfiance must be properly grounded.
ToolsYouWill Need
;_'I Jargeblade s_rewdriver
1/4 hex head nutdriver
i{ Channel lock pliers
ElectricalRequirements
CAUTION,FORPERSONALSAFET_ DO NOT USEAN
EXTENSION CORDWITH THISAPPLIANCE.
REMOVE HOUSE FUSE OR OPENCIRCUITBREAKER
BEFOREBEGINNING INSTALLATION.
This appliance must be supplied with the proper voltage and
t_'equency, and connected
to an individual, properly grounded
branch circuit, protected by a ciroait breaker or time delay fllse,
as noted on the rating plate.
Wiringmustcoeform to National E lectric Codes.
It the electric service provided does not meet the above
specitications,
have a licensed electrician install an approved outlet.
Because ran ,e terminals are not accessible alier range is in position
tlexible service conduit or cord nltlSt be used.