Before You Carlforservice - GE JBP19 Owner's Manual

Before you call for service...
Troubleshooting 77ps
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Possible Causes What To Do
Surface units
not functioning
properly
The surface units are
not plugged in solidly.
The surface
unit controls
improperly set.
The drip pans are
not set securely in
the cooktop.
With the controls off, check
to make sure the sui'lhce
unit is phNged completely
into the receptacle.
: Check to see the correct
control is set ii)r the sui'lhce
unit }ou are using.
With the controls off, check
to make sure the drip pan is
in the recess in the cooktop
and that the opening in the
pan lines up with the
receptacle.
Thedisplaygoes
blankor indicator
lightscroneon
whenrange is
notin use
Power surge.
Disconnect power at the
tuse box or cir(afit breaker
tor at least 10 seconds.
Turn power on and power
up )our range. If the
indicator lights are still on,
call tor service.
Oven light does Light bulb is loose Tighten or replace
not work or defective, the bulb.
Switch operating light
is broken.
(;all tor service.
Ovenwill
notwork
Plug on range is not
completely inserted in
the elecUScal outlet.
Make sure electrical plug is
phNged into a live, properly
grounded outlet.
A fuse in your home Replace fl]se or reset
may be blown or the cirQfit breaker,
circuit breaker wipped.
Oven controls : See the Using the
improperly set. oven section.
Door left in the
locked position.
It necessm T, allow the
oven to cool then tlulock
the door,
37