Advertisement
Using the self-cleaning oven.con some
models;
GEAppliances.com
o
_--Self-_
®
L3imeJ
How to Delag
the Start
of Cleaning
(on
some
models)
Hake sure the clock shows the correct time
ofdag.
[_
Latch the door.
[_] Touch the Self Clean pad.
[]_] Using the + or - pads, enter
the desired clean time.
The display will show the start time. It will
not be possible to unlatch the oven door
until the temperature drops below the lock
temperature.
The oven shuts off automaticallg when the
clean cgcle is complete, and 0:00 will flash
in the displag.
[_
Touch the Start Time pad.
The earliest start time gou can set
will appear in the displag.
[]
Using the + or - pads, enter the time
ofdag gou want the clean cgcle to
start.
[_
Touch the Start/On pad.
n
To Stop a Clean Cgcle
Touch the Clear/Off pad.
Wait until the oven has cooled below the
locking temperature to unlatch the door.
You will not be able to open the door right
awag unless the oven has cooled below
the locking temperature.
After a Clean
Cgcle
You mag notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with
a soap-filled steel woo! pad and rinse
thoroughlg with o vinegar and water
mixture.
These deposits are usuallg a salt residue
that cannot be removed bg the clean
cgcle.
If the oven is not clean after one clean
cgcle, repeat the cgcle.
You cannot set the oven for cooking until
the oven is cool enough for the door to
be unlatched.
While the oven is self-cleaning, gou
can press the Clock pad to displag the
time of dog. To return to the clean
countdown, press the Self Clean pad.
Applg a small amount of vegetable oil
to a paper towel and wipe the edges of
the oven rackswith the paper towel. Do
not sprag with Pam®or other lubricant
sprags.
23
Advertisement
