Installation Instructions - GE JGBS04 Owner's Manual & Installation Instructions

Installation Instructions
FOR YOUR SAFETY
Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinit U of this or an g other appliance. If
gou smell gas:
[] Open windows.
[] Don't touch electrical switches.
[] Extinguish any open flame.
[] Immediately call your gas supplier.
TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver
3/16" or smaller
j -
Pencil and ruler
Level
Open-end or
adjustable wrench
Pipe wrenches (2)
(one for backup)
Drill, awl or nail
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• Pipe joint sealant or UL-approved pipe thread
tape with Teflon* that resists action of natural
and LP gases
• Flexible metal appliance connector (1/2" I.D.)
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing
a new range.
• Flare union adapter for connection to gas
supply line (314" or 112" NPT x 1/2" I.D.).
• Flare union adapter for connection to pressure
regulator on range (1/2" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water.
• Lag bolt or 1/2" O.D. sleeve anchor (for concrete
floors only).
• Long matches and/or match holder (for models
equipped with standing pilots).
*Teflon: Registered trademark of DuPont
PART INCLUDED
Anti-tip bracket kit
28