HP CQ58-300 Maintenance And Service Manual page 92

10. If it is necessary to replace the webcam/microphone module, gently detach the webcam/
microphone module from the display enclosure. (The webcam/microphone module is attached to
the display enclosure with double-sided tape.)
CAUTION:
Take extra precaution to ensure the webcam/microphone module is not damaged when removing
and replacing the module.
The webcam/microphone module is available using spare part numbers 703461-001 (HD
webcam/microphone module) and 686285-001 (non-HD webcam/microphone module).
NOTE:
sets of wireless antenna cables and transceivers.
11. If it is necessary to replace the wireless antenna cables and transceivers:
a. Detach the wireless antenna transceivers (1) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
b. Release the wireless antenna cables from the clips and routing channels along the left, right,
and bottom edges of the display enclosure (2).
84 Chapter 4 Removal and replacement procedures
Due to the thin profile of the webcam/microphone module, it is easily damaged.
Depending on computer model, some computer models may be equipped one or two