4.
Remove the display assembly (2).
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two display bezel screw covers (1) and the two Phillips PM2.5×5.5 screws (2)
that secure the display bezel to the display assembly.
b.
Flex the inside edges of the bottom edge (3), the left and right sides (4), and the
top edge (5) of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel (6). The display bezel is available using the following spare
part numbers:
●
●
78
Chapter 4 Removal and replacement procedures
686255-001 — For use on Compaq Presario CQ58 computer models
686254-001 — For use on HP 2000 Notebook PC computer models