Table of Contents
Advertisement
8.
Remove the Phillips PM2.0×2.5 screw (1) and the three Phillips PM2.5×6.5 screws (2) that secure
the top cover to the computer.
9.
Lift the rear edge of the top cover (1) and swing it up and forward until the left and right sides of
the top cover detach from the base enclosure.
10.
Remove the top cover (2).
Reverse this procedure to install the top cover.
58
Chapter 4 Removal and replacement procedures
- Quick Links:
- Product Description
- Display
- Memory Module
Hide quick links:
Advertisement
Table of Contents
