Fan/Heat Sink Assembly - HP Compaq CQ58-200 Maintenance And Service Manual

Fan/heat sink assembly

NOTE: The fan/heat sink assembly spare part kit includes replacement thermal materials.
Description
Fan/heat sink assembly for use only with computer models equipped with an AMD processor
Fan/heat sink assembly for use only with computer models equipped with an Intel processor and a
graphics subsystem with discrete video memory
Fan/heat sink assembly for use only with computer models equipped with an Intel processor and a
graphics subsystem with UMA video memory
NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side
of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a
temperature sensor and is designed to turn on automatically when high temperature conditions exist.
These conditions are affected by high external temperatures, system power consumption, power
management/battery conservation configurations, battery fast charging, and software requirements.
Exhaust air is displaced through the ventilation grill located on the left side of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
WLAN module (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
Battery on page 34), and then remove the following components:
WLAN module on page
Hard drive on page 47)
Keyboard on page 53)
Top cover on page 57)
Speakers on page 65)
USB board on page 67)
Power connector cable on page
Display assembly on page
System board on page
42)
69)
71)
81)
Component replacement procedures
Spare part number
688281-001
685087-001
685086-001
87