HP Compaq CQ58-200 Maintenance And Service Manual page 90

●
Fan/heat sink assembly (see
●
Processor (Intel only; see
NOTE: AMD processors come soldered to the system board and cannot be removed or
replaced.
To remove the system board:
1. Close the computer, turn it upside down, and then disconnect the optical drive connector cable
from the system board.
2. Turn the computer back over, open it, and then remove the two Phillips PM2.5×4.0 screws (1)
that secure the system board to the base enclosure.
Fan/heat sink assembly on page
Processor on page 93)
87)
Component replacement procedures 83