HP Compaq CQ58-200 Maintenance And Service Manual page 85

b. Remove the four Phillips PM2.5×4.0 screws (1) that secure the display panel to the
enclosure, and then remove the display panel (2) from the enclosure.
c. On the back of the display panel, release the adhesive strip (1) that secures the display
panel cable to the display panel, and then disconnect (2) and remove (3) the cable.
d. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display hinges to
the display panel.
78 Chapter 4 Removal and replacement procedures