Table of Contents
Advertisement
Date & ti ÷
If you press OK when the Da_e &
Time option is highlighted in the
Setup menu, the Date & Tree screen
displays. This screen allows you to set
the current date and time, as well as
the date/time format, for the
camera. This is usually done when
you first set up the camera; however, you may need to re-set
the date and time when you are travelling to different time
zones, or when the batteries are removed from the camera for
more than 10 minutes.
To set the date, time, and date/time format, follow the same
procedure used in Selling the date and tree on page 18.
USB configuration
If you press OK when the USB option
is highlighted in the Setup menu, the
USB Conf guration sub-menu
displays. This sub-menu determines
how the camera is recognized when
connected to a computer.
÷ Digita Camera--Causesthe
computer to recognize the camera as a digital camera
using the Picture Transfer Protocol (PTP)standard. This is
the default setting on the camera. Use this setting for
unloading and sharing on a Windows computer that has
the HP Photo & Imaging software installed on it.
72
hp photosmart 930 series user's manual
Advertisement
Table of Contents
