Setting The Focus Range - HP Photosmart 930 SERIES User Manual

getting the {ocus range
TheF_u_ button letsyou toggle
between the three focus range
settings on the camera. Narmal
is the default setting. The focus
range setting resets to Normal
when you turn the camera off.
To change the focus range setting, press the Focus button on
the top of the camera until the Macro _,_or Infinity oo focus
light is lit. The default Norma focus range setting is selected
when neither focus light is lit. The following table describes
each of the focus range settings on the camera.
None Normal i Use when taking pictures of subjects greater
ithan 0.5 m (19.7 in) away. Auto focus is
ilimited to a distance range of 0.5 m
i(19.7 in) to infinity.
isubjects lessthan 0.5 m (19.7 in) away.
Auto focus is limited to a distance range of
0.14 to 0.7 m (5.5 to 27.6 in) at wide, and
0.4 to 0.7 m (15.7- 27.6 in) at zoom
!i r anges greater than wide.
oo hfinity Use when taking pictures of distant objects
............................... ........................................... a" andscapes acu s!!x a ,!! ...........
NOTE When set to the Macro _$ focus range, the camera will
not take a picture if it cannot find focus (the focus brackets
turn red in Lve V_w and the AF!_. viewfinder light blinks
green). However, when set to the Narmal focus range, the
camera will still take a picture if it cannot find focus.
30 hp photosmart 930 series user's manual