Macintosh - HP Photosmart 930 SERIES User Manual

NOTE If the installation window does not appear, click Start,
and then click Run. Type X:\Setup exe, where X is the
letter of your CD drive.
2 ClickNe×L and thenfollow the on-screeninstructions to
installthe software.
Your Windows CD may also include bonus software from other
manufacturers. To install any bonus software:
ClickStart,click Run,and in the Open box, type
X:\Bonus\_tup.exe (whereX is the letter of your CD drive).
2 ClickOK, and thenfollow the on-screeninstructionsto
installthe bonussoftware.
M_dntosh
] Insertthe HPPhoto& Imaging softwareCD into the CD
driveof your computen
2 Double-clicktheCD icon on the computerdesktop.
3 Double-click the installericon, and thenfollow theon-screen
instructions to install the software.
NOTE Before you can unload images from the camera to a
Macintosh computer, you must first change the USB
Configuration setting to Disk Dri_ in the Setup menu on
the camera. See Chapter 6: Using the setup menu on
page 70, and then see USB configurat on on page 72.
Your Macintosh CD may also include bonus software from
other manufacturers. To install any bonus software:
Double-click the Bonus folder icon.
2 Double-click the installer icon for the bonus software.
3 Follow the on-screen instructions to install the software.
20 hp photosmart 930 series user's manual